All of the Metlund components are designed with United States technology and manufactured in the United States.
MODEL S-02T Components:
- Metlund Controller
- Taco Model 0011 Pump
- Invensys Erie Valve
Metlund Electronic Controller (solid state)
Designed and developed by ACT, Inc. Metlund Systems; manufactured and quality controlled by EMS/Sandberg Industries in Santa Ana, California, a leading manufacturer of electronic circuit boards and electronic packaging. EMS/Sandberg Industries is a Fortune 500 company whose client list includes AT&T, Beckman Industries, IBM, Jet Propulsion Laboratories and NASA.
Taco Model 0011 High Velocity Circulator
The Taco 0011 high velocity/high head bronze circulator is designed for residential and light commercial systems.
The 0011 has the exclusive "00" cartridge design and ACB motor protector. The "00" cartridge contains all the moving parts; replacing it virtually rebuilds the circulator. The unique ACB anti-condensate baffle with ambient air-flow prevents the buildup of condensation on the motor windings when pumping chilled water. It has a high head medium flow characteristic for applications in high pressure drop boilers, fan coil units, heat exchangers, large radiant heating systems and heat recovery units/earth loop systems.
The quiet, direct-drive high velocity series contains no mechanical seal and requires no maintenance. This compact design has low power consumption and is ideal for those high efficiency jobs that have space requirements. Because universal flange to flange length and orientations are featured, the 0011 may easily replace other models.
|
Taco Model 0011 High Velocity Pump | |
|
UL and CSA Listed | |
| ACB Baffle | Non-ferrous |
| Casing | Bronze |
| Impeller | Non-Metallic |
| Shaft | Ceramic |
| Bearings | Carbon |
| Connections | Flanged 3/4 inch |
| Life Expectancy | 15 Years |
| Performance | Gallons/Minute=28 Total Head+30 ft. |
| Motor Type | Permanent Split Capacitor |
| HP | 1/8 HP @ 3250 RPM |
| Electrical Charge | 1.76 Amp Rating Impedance Protected |
| Pressure Rating | 125 PSI Max |
| Temp Rating | 230º F Max |
Invensys Hydronic Zone Valve
Model VT2213G13B220
This is a brass electronic modulating zone valve that controls the flow of hot water. Invensys is North America's largest supplier of residential automated systems.
Type: Full closing front and back
Rated: 300 PSI System pressure - 15,000 cycles 33ºF-200º temp.capability
Life Expectancy: 15 years
|
Metlund DMAND S02T Kit Configurations | |
| S-02T-PF |
Patented DMAND Circuit Board Pump with built in IFC valve Flanges, Two copper "T" compression fittings Two stainless steel flex-lines for easy installation |
| S-02T-PF-R | Patented DMAND Circuit Board Pump with built in IFC valve Flanges, Two copper "T" compression fittings Two stainless steel flex-lines for easy installation One remote control package |
| S02TPFV102 | Patented DMAND Circuit Board Pump with built in IFC valve Flanges, Two copper "T" compression fittings Two stainless steel flex-lines for easy installation One hard-wired motion sensor |
| S-02T | Patented DMAND Circuit Board Pump with built in IFC valve Flanges One hard wired button For dedicated return lines No check valve is required |
For more information or to purchase visit The Energy SuperMarket.
